MTL MAH-28 Micro Rotary Incremental Encoders
MTL presents the MAH-28 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
Specifications | ||
Supply voltage | DC5V±5% | |
Current consumption | 100mA or less(under no load) | |
Resolution | 262,14(18bit) 524,28(19bit) 1,048,576(20bit) |
|
Allowable rotation | 6000r/min | |
Allowable load of shaft(electrical) | Radial | 14.7N(1.5kgf) |
Thrust | 4.9N(0.5kgf) | |
Working temperature/ humidity | -10℃~70℃/RH35%~90% no dewing | |
Storage temperature | -20℃~80℃ | |
Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |
Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | |
Cable | Outside diameter φ4.2 7-core vinyl wire Insulated shield cable AWG28(length 1m) | |
Mass | 80g(excluding cable) |
Decoder Specifications | ||
Supply voltage | DC5V ±5% | |
Current consumption | 60mA or less(160mA or less including encoder) | |
Parallel data update cycle | 60μs(16.7kHz) | |
Output circuit | NPN open collector output(when using parallel output) | |
Output capacity | Sink current 20mA or less Load voltage 35V or less Residual voltage 0.4 or less | |
Logic | Negative logic(H=0, L=1) | |
Connection | Power supply and parallel signal output by P=2.54 header pins(see diagram below) |
For other products please check product selection table: Rotary Encoders
There are no reviews yet.