MTL ME-9-P Micro Rotary Incremental Encoders
MTL presents the ME-9-P series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
Specifications | |||||
Square wave | Built-in multiplication circui(t ×2・×4・×8・×16) | ||||
Supply voltage | DC5V ±10% | DC5V ±5% | |||
Current consumption | 40mA or less(under no load) | 50mA or less(under no load) | |||
Detection system | Incremental | Incremental | |||
Output | Output pulse number
(Standard) 〔Pulse number/rotation〕 |
32 300
100 360 200 500 256 |
900(*)
1,000(*) 1,024 |
EX 1,000×2(2000) 1,000×4(4000)
1,000×8(8000) 1,000×16(16000) |
|
Output phase | A, B, Z phase(Z=“H”) | A, B, Z phase | |||
Output form | Square wave | Square wave | |||
Output capacity | Sink current:20mA
Residual voltage:0.5V or less(at 10mA) Open collector output:Load voltage DC13.2V max |
Sink current:20mA max.
Residual voltage:0.5V or less(at 10mA) Open collector output:Load voltage DC13.2V max |
|||
Maximum response frequency
(response pulse number) |
100kHz | Open collector output:100kHz
Line driver output:50kHz×(by multiplication) |
|||
Output phase difference | A, B phase difference 90°±45(°T/4±T/8) Z phase T±T/2(see Output Waveform) | Refer to the figure on the right | |||
Waveform rise/fall time | 2μs or less(output cable 140mm or less) | 1μs or less(output cable 140mm or less) | |||
Allowable load of shaft(electrical) | Radial | 1.9N(200gf) | 0.98N(100gf) | 0.98N(100gf) | |
Thrust | 1.9N(200gf) | 0.98N(100gf) | 0.98N(100gf) | ||
Maximum allowable revolutions
(mechanical) |
6,000r/min | 6,000r/min | |||
Working ambient temperature/ humidity | 0℃~60℃ RH35%~90% no dewing | 0℃~60℃ RH35%~90% no dewing | |||
Storing ambient temperature | -20°C~80°C | -20°C~80°C | |||
Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |||
Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | |||
Cable |
Voltage・Open collector:Vinyl wire(AWG30) Cable length 140mm
Line driver・Vinyl wire(AWG32) Cable length 330 |
Open collector:Vinyl wire(AWG30) Cable length 140mm
Line driver・Vinyl wire(AWG32) Cable length 330 |
|||
Mass | 10g | 20g |
For other products please check product selection table: Rotary Encoders
There are no reviews yet.