MTL MG Micro Rotary Incremental Encoders
MTL presents the MG series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
Specifications | ||||||
Supply voltage | DC5V±10% | |||||
Current consumption | 30mA or less( under no load) | |||||
Detection system | Incremental | |||||
Output | Output pulse number (Standard) 〔Pulse number/rotation〕 |
|||||
100 500 200 512 250 600 256 800 300 1,000 360 1,024 400 1,200 |
100 600 2000 200 800 250 1,000 300 1,024 360 1,200 400 1,500 500 1,800 |
|||||
Output phase | A, B, Z phase(Z=H) | |||||
Output form | Square Wave | |||||
Output capacity | Sink current:30mA Residual voltage:0.5V or less(at 10mA) |
|||||
Maximum response frequency (response pulse number) | 100kHz | |||||
Output phase difference | A, B phase difference 90(°T/4±T/8 Z phase T±T/2 ) | |||||
Waveform rise/fall time | 2μs or less | |||||
Maximum allowable revolutions (mechanical) |
10,000r/min (such that the maximum response frequency is not exceeded) |
|||||
Working ambient temperature/ humidity | -10°C~70°C RH35%~90% no dewing |
|||||
Storing ambient temperature | -20°C~80°C | |||||
Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |||||
Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | |||||
I/O terminals | PCB through hole terminals (refer to outside dimensions diagram) |
|||||
Mass | 10g or less | 20g or less |
Allowable change amount of fitting shaft
MG-20 | Pulse number | 100~200 | 250~600 | 800~1,200 |
MG-30 | Pulse number | 100~300 | 400~1,024 | 1,200~2,000 |
Allowable eccentricity | Radial | ±0.05mm | ±0.02mm | |
Thrust | ±0.2mm | ±0.1mm | ±0.05mm |
For other products please check product selection table: Rotary Encoders
There are no reviews yet.