Technoton DFM Fuel Flow Meter
DFM is designed for fuel consumption measurement in fuel lines of vehicles and stationary machines, also for operating time monitoring in different working modes of engine.
DFM fuel flow meter is used for consumption measurement of the following fluids:
- diesel fuel
- heating oil
- other liquid fuels and mineral oils with kinematic viscosity of 1.5 to 6 mm2/s.
DFM is a tool for direct measurement of fuel consumption, which is used as a part of GPS tracking system, vehicle telematics system or as an stand-alone (autonomous) solution for fuel consumption monitoring.
One-chamber DFM fuel flow meters are mainly intended for small and medium engines with indirect injection fuel system.
Features & Benefits:
- Digital Counters and built-in battery
- Protection against cheating
|Nominal pressure, bar||2|
|MAX pressure, bar||25|
|Supply voltage, V||10-45|
|Overvoltage protection, V||≤100|
|Current consumption, mA (24 V/12 V), mA||25 / 50|
|Operating temperature, (without/with display), °C||-40..+85/|
|Ingress Protection Rating||IP54|
|Relative accuracy error per chamber, %, not more than||1|
|Model||Nominal bore||Start-up flow rate, l/h||MIN flow rate, l/h||MAX flow rate, l/h||Recalibration interval, l|
|DFM 50||6||0,5||1||50||100 000|
|DFM 100||6||0,5||2||100||100 000|
|DFM 250||8||2||5||250||250 000|
|DFM 500||12||5||10||500||500 000|
* A symbol is not specified for differential fuel flow meters.
** For autonomous fuel flow meters Z version is not used.
*** This version is delivered upon special order. Designation U is available only for one-chamber flowmeters.