MTL MAS-18 Micro Rotary Incremental Encoders
MTL presents the MAS-18 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
| Specifications | ||
| Supply voltage | DC5V ±5% | |
| Current consumption | 100mA or less(under no load) | |
| Resolution | 32,768(15bit), 65,536(16bit) 131,072(17bit), 262,144(18bit) |
|
| Allowable revolutions | 6000r/min | |
| Allowable load of shaft(electrical) | Radial | 1.9N(200gf) |
| Thrust | 1.9N(200gf) | |
| Working temperature/humidity | -10°C~+70°C/RH35%~90% | |
| Storage temperature | -20°C~+80°C | |
| Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |
| Impact resistance | Durability 500m/s^2( about 50G) 3 times each in X, Y, and Z directions | |
| Cable | Outside diameter φ3-8-core vinyl wire Insulated shield cable AWG30(length 0.5m) | |
| Data formats | RS422 SSI Point To Point | |
| Mass | 30g | |
| Decoder Specifications | ||
| Supply voltage | DC5V ±5% | |
| Current consumption | 60mA or less( 160mA or less including encoder) | |
| Parallel data update cycle | 60μS(16.7kHz) | |
| Output circuit | NPN open collector output(when using parallel output) | |
| Output capacity | Sink current 20mA max. Load voltage 35V max. Residual voltage 0.4 or less |
|
| Logic | Negative logic (H = 0 , L=1) | |
| Connection | Power supply and parallel signal output by P=2.54 header pins( see diagram below) | |
For other products please check product selection table: Rotary Encoders





There are no reviews yet.