MTL MAS-14 Micro Rotary Incremental Encoders
MTL presents the MAS-14 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
| Specifications | ||
| Supply voltage | DC 5V ±5% | |
| Current consumption | 100mA or less(under no load) | |
| Resolution | 32,768(15bit), 65,536(16bit), 131,072(17bit), 262,144(18bit) |
|
| Allowable rotation | 6000r/min | |
| Allowable load of shaft(electrical) | Radial | 0.98N(100gf) |
| Thrust | 1.9N(200gf) | |
| Working temperature/ humidity | -10℃~70℃/RH35%~90% no dewing | |
| Storage temperature | -20℃~80℃ | |
| Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |
| Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | |
| Cable | Outside diameter φ3 6-core vinyl wire Insulated shield cable AWG28(length 1m) | |
| Mass | 30g(excluding cable) | |
| Decoder Specifications | |
| Supply voltage | DC5V ±5% |
| Current consumption | 60mA or less(160mA or less including encoder) |
| Parallel data update cycle | 60μS(16.7kHz) |
| Output circuit | NPN open collector output(when using parallel output |
| Output capacity | Sink current 20mA or less Load voltage 350V or less Residual voltage 0.4V or less |
| Logic | Negative logic(H=0, L = 1) |
| Connection | Power supply and parallel signal output by P=2.54 header pins(see diagram below) |
For other products please check product selection table: Rotary Encoders





There are no reviews yet.