MTL MAH-28 Micro Rotary Incremental Encoders
MTL presents the MAH-28 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
| Specifications | ||
| Supply voltage | DC5V±5% | |
| Current consumption | 100mA or less(under no load) | |
| Resolution | 262,14(18bit) 524,28(19bit) 1,048,576(20bit) |
|
| Allowable rotation | 6000r/min | |
| Allowable load of shaft(electrical) | Radial | 14.7N(1.5kgf) |
| Thrust | 4.9N(0.5kgf) | |
| Working temperature/ humidity | -10℃~70℃/RH35%~90% no dewing | |
| Storage temperature | -20℃~80℃ | |
| Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | |
| Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | |
| Cable | Outside diameter φ4.2 7-core vinyl wire Insulated shield cable AWG28(length 1m) | |
| Mass | 80g(excluding cable) | |
| Decoder Specifications | ||
| Supply voltage | DC5V ±5% | |
| Current consumption | 60mA or less(160mA or less including encoder) | |
| Parallel data update cycle | 60μs(16.7kHz) | |
| Output circuit | NPN open collector output(when using parallel output) | |
| Output capacity | Sink current 20mA or less Load voltage 35V or less Residual voltage 0.4 or less | |
| Logic | Negative logic(H=0, L=1) | |
| Connection | Power supply and parallel signal output by P=2.54 header pins(see diagram below) | |
For other products please check product selection table: Rotary Encoders
GL150HSANA High Voltage DC Contactor
GLK20AC High Voltage DC Contactor
GL250HSANA High Voltage DC Contactor
GLW400AT High Voltage DC Contactor
GLF40AB High Voltage DC Contactor
ASM Position Sensor WS10-1250-10-IE24HI-SB0-D8-SAB2 



There are no reviews yet.