ROS-W Remote Optical LED Sensor
Monarch Instrument ROS-W remote optical LED sensor has been designed for wide range of applications especially in rotating industrial machine parts. Monarch remote optical LED sensors are fully compatible with Monarch stroboscopes for detecting misalignment or other technical issues on shafts and any other rotating parts.
- ROS-W has a visible red LED light source and green LED On-Target indicator.
- Measurement range up to 250,000 RPM
- The housing body has stainless steel non-magnetic structure and not hardenable by heat treatment.
- For easy installation, mounting instructions are included.
The red LED light source acts as the aiming device during setup and can accurately measure speeds. The sensor is housed in a threaded 303 stainless steel tube and supplied with a 90 degree.
|Speed Range||1-250,000 RPM|
|Illumination||Visible red LED|
|On-Target Indicator||Green LED on the wire end cap|
|Operating Range||up to 36 in. [0.9 m] and 45° offset from the target|
|Operating Temperature||14° to 158 °F (-10° to 70 °C)|
|Power Required||3.0 to 15 V dc @ 40 mA|
|Output Signal||Negative pulse input voltage (+V) to 0|
|Humidity||Maximum relative humidity 80% for temperature up to 88 °F (31 °C) decreasing linearly to 50% relative humidity at 104 °F (40 °C)|
|Standard Cable||8 ft. [2.4 m]|
|Material||303 stainless steel supplied with two M16 jam nuts and mounting bracket|
|Dimensions||Threaded tube: 2.90 in. x 0.62 in. diameter [M16 x 1.5 x 74 mm]|
Be the first to review “ROS-W Remote Optical LED Sensor”
You must be logged in to post a review.