MTL MAS-17 Micro Rotary Incremental Encoders
MTL presents the MAS-17 series rotary encoders. They all based on space-saving design
and available in many types from ultra-small types to high-resolution products…
| Specifications | |||
| Supply voltage | DC5V ±5% | ||
| Current consumption | 80mA or less(under no load) | ||
| Output code | G:gray code, N:Pure binary code, B:BBC code | ||
| Logic | Negative logic(H=0, L=1) | ||
| Resolution | G, N | B | |
| 256(8 bits)512(9 bits)1024(10 00)bits | |||
| Output circuit | NPN open collector(256 gray codes CMOS output(256 pure binary and 512 or more divisions) | ||
| Output capacity | Sink current per bit 4mA(output withstand voltage 7V) Residual voltage 0.4V or less | ||
| Allowable load of shaft (electrical) | Radial | 1.9N(200gf) | |
| Thrust | 1.9N(200gf) | ||
| Maximum revolutions | 6,000r/min | ||
| Maximum response frequency | 20kHz | ||
| Working temperature/humidity | 0℃~60℃/RH35%~90% no dewing | ||
| Storage temperature | -20℃~80℃ | ||
| Vibration resistance | Durability 55Hz, double amplitude 1.5mm 2 hours each in X, Y, and Z directions | ||
| Impact resistance | Durability 500m/s(2 about 50G) 3 times each in X, Y, and Z directions | ||
| Cable | 256:Outside diameter φ3 10-core vinyl wire Insulated shield cable(length 1m) | ||
| 512:1024:1000:Vinyl wire(AWG30) Cable length 330mm | |||
| Mass | 40g(excluding cable) | ||
For other products please check product selection table: Rotary Encoders
PLT200 Pocket Laser Tachometer
GIGAVAC GVB351CAB Bidirectional Contactor
KJTDQ KJT-SK-41920-PR Speed Sensor
Sentop R22-SER-W360 Rotary Encoder
DF Electric 420032 Cylindrical Fuse 10x38
GIGAVAC GV241MAB DC Contactor
ASM Sensor Cable KAB-5M-M12/8F/W/69K-LITZE
Lam Step Motor M1233012
Sentop R40-2410-W360 Rotary Encoder
Sentop R40-2442-W360 Rotary Encoder
Sentop R36-2442-W360 Rotary Encoder
HS-4200500208 Vibration Sensor 4-20mA, 0-50 mm/sec
HS-4200100208 Vibration Sensor 4-20mA, 0-10 mm/sec
GIGAVAC GV142BAX DC Contactor
GIGAVAC MX110CEB DC Contactor
Sentop R36-2410-W360 Rotary Encoder 




There are no reviews yet.