FA54 Series Speed Sensors
Speed sensors type series FA54 are compact and robust flange sensors with type approval from all common ship class societies. They are suitable for scanning ferromagnetic objects, such as toothed wheels, bolt heads, drillings/boreholes, gaps, grooves, or impulse bands.
The different sensor variants allow measurements with up to two measuring channels and up to four output signals for measurement of frequencies from 0 to 20 kHz. Thus, they are suitable for standstill detection and for rotational direction detection by using phase-shifted signals. Different sensor tube lengths and connection outlets as well as your tailor-made solution on request enable an adaptation to almost any application.
- Robust and high quality housing: IP68 pressure-tight
- Excellent vibration and shock resistance
- High degree of EMC immunity for difficult electrical environment
- Connection outlet straight or lateral; with protective tubing on request
- Up to four output signals, on request available with one status signal for rotational direction detection, on request with two galvanically isolated output signals
- Due to its design and its approvals especially suitable for the shipbuilding industry
Download FA54 Series Model List and Datasheet
|
 |
| Type |
Measuring principle |
Signal outputs |
Signal form |
| FAH54 |
Hall |
One square wave signal |
 |
| FAHZ54 |
|
Two square wave signals,
Q2 to Q1 is 90° phase shifted |
 |
| FAHS54 |
Hall |
Two square wave signals,
Q2 to Q1 is 90° phase-shifted,
one rotation direction signal |
 |
| FAHD54 |
Hall |
Two galvanically isolated square wave signals,
Q2 to Q1 is 90° phase shifted |
 |
| FAHQ54 |
Hall |
Two + Two inverted square wave signals,
Q1 to Q2 and Q1_N to Q2_N are 90° phase shifted |
 |
| FAHY54 |
Hall |
Two square wave signals,
Q1_N inverted to Q1 |
 |
|
FA11 Series Speed Sensors
Speed sensors of type FA11 are non-contacting one- or two-channel speed encoders with a brass threaded tube. They measure frequency in accordance with the difference-hall-effect principle (FAH type) or inductive-magnetic principle (FAJ type). These speed sensors are suitable for scanning ferromagnetic materials, e.g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves, or pulse bands on smooth shafts (accessories). Its compact and robust design, as well as the relevant shipbuilding approvals, make this product ideal for marine applications.
- Due to its design and its approvals especially suitable for the shipbuilding industry
- Speed sensor with the square wave output signal
- Robust housing: IP66/68
- Excellent vibration and shock resistance
- Variable lengths, threads, and electrical connections
- Optionally with two galvanically isolated output signals
- Optionally with an additional status signal for the direction of rotation detection
Download FA11 Series Model List and Datasheet |
 |
| Type |
Measuring principle |
Output signals |
Signal pattern |
| FAH11 |
Difference-hall |
1 square wave signal |
|
| FAJ11 |
Inductive magnetic |
1 square wave signal |
|
| FAHZ11 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset |
|
| FAHS11 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset,
1 status signal for rotational direction detection |
|
| FAHD11 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset,
signals galvanically isolated |
|
|
FA13 Series Speed Sensors
Speed sensors of type FA13 are non-contacting one- or two-channel speed encoders with a stainless steel threaded tube. They measure frequency in accordance with the difference-hall-effect principle (FAH type) or inductive-magnetic principle (FAJ type). These speed sensors are suitable for scanning ferromagnetic materials, e.g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves or pulse bands on smooth shafts (accessories). Its compact and robust design, as well as the relevant shipbuilding approvals, make this product ideal for marine applications.
- Due to its design and its approvals especially suitable for the shipbuilding industry
- Speed sensor with the square wave output signal
- High quality and robust stainless steel housing: IP66/68/69
- Excellent vibration and shock resistance
- The high degree of EMC immunity for difficult electrical environment
- Variable lengths, threads, and electrical connections
- Optionally with two galvanically isolated output signals
- Optionally with an additional status signal for the direction of rotation detection
Download FA13 Series Model List and Datasheet |
 |
| Type |
Measuring principle |
Signal outputs |
Signal form |
| FAH13 |
Difference-Hall |
1 square wave signal |
|
| FAJ13 |
Induct.-magnetic |
1 square wave signal |
|
| FAHZ13 |
Difference-Hall |
Two square wave signals,
Q2 to Q1 is 90° phase shifted |
|
| FAHS13 |
Difference-Hall |
Two square wave signals,
Q2 to Q1 is 90° phase-shifted,
one rotation direction signal |
|
| FAHD13 |
Difference-Hall |
Two square wave signals,
galvanically isolated,
Q2 to Q1 is 90° phase shifted |
|
| FAHQ13 |
Difference-hall |
Two + Two inverted square wave signals, Q1 to Q2 and Q1_N to Q2_N are 90° phase shift |
|
|
FA52 Series Speed Sensors
Speed sensors of type FA52 are non-contacting multi-channel speed encoders with a stainless-steel flange and sensor tube. They measure frequency in accordance with the eddy-current or difference-hall-effect principle. They acquire the speed of ferromagnetic (FAH type) or electrically conductive (FAW type) gearwheels, e. g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves, or pulse bands on smooth shafts (accessories). Their compact and robust design, as well as the relevant tests as per DIN EN 50155, make them ideal for applications in the field of transport technology, e. g. measuring the speed at the traction motor, gearbox, or wheelset. The sensors are available with various output signals.
- Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology
- Eddy current version: Scanning of all electrically conductive materials (steel or aluminum)
- With voltage or current output signal
- With up to 4 galvanically isolated sensors in one enclosure
- Robust and high-quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data)
- Excellent vibration and shock resistance and double protection of the sensor head
- Without magnetic preload and thus, no accumulation of metal chips
- Connection outlet straight or lateral; with protective tubing on request
- Detection of very low speed (near zero speed)
Download FA52 Series Model List and Datasheet |
 |
| Type |
Measuring principle |
Signal outputs |
Signal form |
| FAWZ52 |
Eddy current |
Two square wave signals,
Q2 to Q1 is 90° phase shifted |
|
| FAHZ52 |
Hall |
| FAWS52 |
Eddy current |
Two square wave signals,
Q2 to Q1 is 90° phase shifted,
one rotation direction signal |
|
| FAHS52 |
Hall |
| FAWD52 |
Eddy current |
Two galvanically isolated square wave signals,
Q2 to Q1 is 90° phase shifted,
type FAHD52, FAWD52 with voltage signal output,
type FAHI52 with current signal output |
|
| FAHD52 |
Hall |
| FAHI52 |
| FAWQ52 |
Eddy current |
Two + Two inverted square wave signals,
Q1 to Q2 and Q1_N to Q2_N is 90° phase shifted |
|
| FAHQ52 |
Hall |
| Typ |
Measuring principle |
Signal outputs |
Signal form |
| FAHU52[..]-U01 |
Hall |
Four galvanically isolated square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Type –U01: voltage output
Type –U11: current output |
 |
| FAHU52[..]-U11 |
| FAHU52[..]-U02 |
Hall |
Two square wave signals + two galvanically isolated square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Type –U02: voltage output
Type –U12: current output |
 |
| FAHU52[..]-U12 |
| FAHU52[..]-U03 |
Hall |
Two galvanically isolated measuring systems, each with two square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Type –U03: voltage output
Type –U13: current output |
 |
| FAHU52[..]-U13 |
| FAHU52[..]-U21 |
Hall |
Four galvanically isolated square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Q1, Q2 with voltage output
Q3, Q4 with current output |
|
| FAHU52[..]-U22 |
Hall |
Two square wave signals + two galvanically isolated square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Q1, Q2 with voltage output
Q3, Q4 with current output |
|
| FAHU52[..]-U23 |
Hall |
Two square wave signals + two galvanically isolated square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Q1, Q2 with current output
Q3, Q4 with voltage output |
|
| FAHU52[..]-U24 |
Hall |
Two galvanically isolated measuring systems, each with two square wave signals, Q1 to Q2 and Q3 to Q4 are 90° phase shifted
Q1, Q2 with voltage output
Q3, Q4 with current output |
|
|
FA5 Series Speed Sensors
Speed sensors of type FA5 are non-contacting 2-channel speed encoders with a stainless-steel sensor tube. They measure frequency in accordance with the difference-hall effect principle. They acquire the speed of ferromagnetic materials, e.g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves, or pulse bands on smooth shafts (accessories). Their compact and robust design, as well as the relevant tests as per DIN EN 50155, make them ideal for applications in the field of transport technology, e.g. measuring the speed at the traction motor, gearbox, or wheelset.
- Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology
- Robust and high-quality housing: IP68 pressure-tight and individually tested at 5 bar (for details see technical data)
- Excellent vibration and shock resistance
- The high degree of EMC immunity for difficult electrical environment
- Connection outlet straight or lateral; with protective tubing on request
- Detection of very low speed (near zero speed)
Download FA5 Series Model List and Datasheet |
 |
| Type |
Measuring principle |
Output signals |
Signal pattern |
| FAHZ5 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset |
|
| FAHS5 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset,
1 status signal for rotational direction detection |
|
| FAHD5 |
Difference-hall |
2 square wave signals,
Q2 to Q1 90° phase offset,
signals galvanically isolated |
|
| FAHQ5 |
Difference-hall |
4 square wave signals,
Q2 to Q1 90° phase offset,
Q1_N and Q2_N are inverted signals of Q1 and Q2 |
|
|
FAHZ5 Series Speed Sensors
Speed sensors of type FAHZ53 are non-contacting 2-channel speed encoders with a stainless-steel flange and sensor tube. They measure frequency in accordance with the difference-hall-effect principle. These speed sensors are suitable for scanning ferromagnetic materials, e.g. gearwheels with various tooth shapes, screw heads, drill holes, apertures, grooves, or pulse bands on smooth shafts (accessories). Their compact and robust design, as well as the relevant tests as per DIN EN 50155, make them ideal for applications in the field of transport technology, e.g. measuring the speed at the traction motor, gearbox, or wheelset.
- Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology
- Speed sensor with two square wave signals 90° offset for the direction of rotation detection
- Robust and high-quality housing: IP68 pressure-tight and individually tested at 5 bar (for details see technical data)
- Excellent vibration and shock resistance
- Straight connection outlet
Download FAHZ5 Series Model List and Datasheet |
 |
| Type |
Measuring principle |
Output signals |
Signal pattern |
| FAHZ53 |
Difference-hall |
2 square wave signals,Q2 to Q1 90° phase offset |
|
|
